Yokogawa PC-Based MX100 - Manual (Page 1233)

App-12
IM MX190-01E
Appendix 1 MX100 Terminology
Unit
Expresses the status when data is retrieved.
Used to indicate the data terminator for data retrieval.
Represents the status when the data is retrieved using the talker.
A value synthesized through logical OR computations of the flag status.
Unit Information
A unit is a single system centering on a main module.
It consists of the following items.
• Product information
• Unit type
• Style
• Temperature unit type
• Unit number
• Timeout value
• CF write mode
• Power supply frequency
• Part number
Timeout Value
Time until the saving of the measured data to the CF card is started when the
connection is cut off.
It is an integer greater than or equal to 60. The unit is seconds.
See appendix 3.
Unit Number
Unit identification number. The user can specify the number.
It is an integer value between 0 and 98.
It is displayed on the 7-segment LED of the main module.
User Count
User-defined sequence information.
Sent to the main unit via communications after the settings.
The main unit is added to the data number of the acquired data.
In retrieval of measured data, you can retrieve this value at the same time as the
time information data corresponding to the data number.