Yokogawa PC-Based MX100 - Manual (Page 1031)

19-37
IM MX190-01E
19
DARWIN for Extended API - Visual C++
CDAQDA100::talkOperationChData
Syntax
int talkOperationChData(int chType = DAQDA100_CHTYPE_MEASALL,
int chNo = DAQDA100_CHNO_ALL);
Parameters
chType Specify the channel type.
chNo Specify the channel number.
Description
Executes declaration of the retrieval of the setup data of operation mode on the
specified channels.
If the channel type is set to the constant for “Specify all measurement channel
types,” all subunits are processed.
If the channel number is set to the constant for “Specify all channel numbers,” all
channels within the channel type are processed.
Return value
Returns an error number.
Reference
talkOperationData
CDAQDA100::talkSetupChData
Syntax
int talkSetupChData(int chType = DAQDA100_CHTYPE_MEASALL, int
chNo = DAQDA100_CHNO_ALL);
Parameters
chType Specify the channel type.
chNo Specify the channel number.
Description
Executes declaration of the retrieval of the setup data of basic setting mode on the
specified channels.
If the channel type is set to the constant for “Specify all measurement channel
types,” all subunits are processed.
If the channel number is set to the constant for “Specify all channel numbers,” all
channels within the channel type are processed.
Return value
Returns an error number.
Reference
talkSetupData
19.6 Details of the DARWIN Class