Yokogawa PC-Based MX100 - Manual (Page 163)

2-140
IM MX190-01E
CDAQMXConfig::setAO
Syntax
void setAO(int chNo,int iRangeAO,int spanMin = 0,int spanMax =
0);
Parameters
chNo Specify the channel number.
iRangeAO Specify the AO range type.
spanMin Specify the span minimum.
spanMax Specify the span maximum.
Description
Sets the channel of the specified channel number to the specified range.
If the maximum and minimum values are the same, the span is considered omitted.
If the channel does not exist or the channel is not on the corresponding module, the
setting is void.
If the constant for “Specify all channel numbers” is specified for the channel
numbers, all channels are processed.
The output type of the output channel data is reset to match the specified range.
Reference
getClassMXChConfig getClassMXOutputData getClassMXSysInfo
CDAQMXChConfig::setAO
CDAQMXChConfig::setSpan
CDAQMXOutputData::setOutputType
CDAQMXSysInfo::getModuleType
CDAQMXSysInfo::getTempUnit
2.5 Details of the MX100 Class