Yokogawa PC-Based MX100 - Manual (Page 164)

2-141
IM MX190-01E
MX100 -Visual C++
2
CDAQMXConfig::setAOType
Syntax
void setAOType(int aoNo,int iKind,int refChNo =
DAQMX_REFCHNO_NONE);
Parameters
aoNo Specify the AO data number.
iKind Specify the AO type using channel type.
refChNo Specify the reference channel number.
Description
Sets the channel type of the AO module.
If unused is specified for the channel type, the channel is set to SKIP (not used).
If AO (transmission output) is specified for the channel type, specify the channel
number of the input channel for the reference channel.
If the channel does not exist, the channel is not on the AO module, or the specified
type is not an AO type, the channel type is not set.
If the constant for “Specify all AO/PWM numbers”is specified for the AO data
numbers, all AO channels are processed.
Each setting type for the channels is reset to match the output type of the output
channel data.
Reference
getClassMXChConfig getClassMXOutputData getClassMXSysInfo
setSKIP
CDAQMXChConfig::setAO
CDAQMXChConfig::setRefChNo
CDAQMXChConfig::setType
CDAQMXChConfig::setValid
CDAQMXOutputData::getOutputType
CDAQMXSysInfo::getModuleType
2.5 Details of the MX100 Class