Yokogawa PC-Based MX100 - Manual (Page 712)

15-10
IM MX190-01E
Status Data
Data Name Function
Unit status value statusUnitMX100
Valid number of FIFOs statusFIFONumMX100
Backup (presence or absence) statusBackupMX100
FIFO FIFO status value statusFIFOMX100
Interval type statusFIFOIntervalMX100
CF CF status type statusCFMX100
Size statusCFSizeMX100
Remaining capacity statusCFRemainMX100
Status return time No. of seconds statusTimeMX100
Milliseconds statusMilliSecMX100
Year statusYearMX100
Month statusMonthMX100
Day statusDayMX100
Hour statusHourMX100
Minute statusMinuteMX100
Second statusSecondMX100
Current Data
Data Name Function
DO Data Valid/Invalid value currentDOValidMX100
ON/OFF status currentDOValueMX100
AO/PWM data Valid/Invalid value currentAOPWMValidMX100
Output data value currentAOPWMValueMX100
Output value currentDoubleAOPWMValueMX100
Initial balance data Valid/Invalid value currentBalanceValidMX100
Initial balance value currentBalanceValueMX100
Initial balance result currentBalanceResultMX100
Trans output data Transmission status currentTransmitMX100
This is the status of each data retrieved with the data retrieval functions.
The initial balance result of the initial balance data is the result executed by the
setup function.
Actually output output statuses such as DO data and AO/PWM data can be
retrieved as current data. However, immediately after sending data, the specified
value is returned, and the actual output may occur at the next timing.
Held data are the values retrieved upon a status update. It is not data from the time
the retrieval function was called.
15.1 Functions and Their Functionalities - MX100/Visual Basic.NET -