Yokogawa PC-Based MX100 - Manual (Page 109)

2-86
IM MX190-01E
CDAQMXChConfig Class
CDAQChInfo
CDAQMXChID
CDAQMXChConfig
This class stores the channel setup data of the MX100.
It is a wrapper class of the MXChConfig structure.
This class can be used as an interface for storing setup data by channel when
retrieving setup data.
Public Members
Construct/Destruct
CDAQMXChConfig Constructs an object.
~CDAQMXChConfig Destructs an object.
Structure Manipulation
getMXChConfig Gets the data in a structure.
setMXChConfig Sets the data in a structure.
initMXChConfig Initializes the data in a structure.
Member Data Manipulation
getSpanMin Gets the span minimum.
getSpanMax Gets the span maximum.
getScaleMin Gets the scale minimum.
getScaleMax Gets the scale maximum.
getRefChNo Gets the reference channel number.
getFilter Gets the filter coefficient.
getRJCType Gets the RJC type.
getRJCVolt Gets the RJC voltage.
getBurnout Gets the burnout type.
isDeenergize Gets the Boolean value of “de-energize”action of relays.
isHold Gets the Boolean value of “hold”action of relays.
isRefAlarm Gets the reference alarm.
isChatFilter Gets the chattering filter value.
setRefChNo Sets the reference channel number.
setFilter Set the filter coefficient.
setBurnout Sets the burnout type.
setRJCType Sets the RJC type.
setAlarm Sets the alarm value.
setDeenergize Sets the Boolean value of “de-energize”action of relays.
setHold Sets the Boolean value of “hold”action of relays.
setRefAlarm Sets the reference alarm.
setChatFilter Sets the chattering filter.
2.5 Details of the MX100 Class