Yokogawa PC-Based MX100 - Manual (Page 167)

2-144
IM MX190-01E
CDAQMXConfig::setDI
Syntax
void setDI(int chNo, int iRangeDI, int spanMin = 0, int
spanMax = 0);
Parameters
chNo Specify the channel number.
iRangeDI Specify the range type of the digital input (DI).
spanMin Specify the span minimum.
spanMax Specify the span maximum.
Description
Sets the channel of the specified channel number to the specified range.
If the maximum and minimum values are the same, the span is considered omitted.
If the channel does not exist or the channel is not on the corresponding module, the
setting is void. Sets the range type using the digital input (DI) detailed range.
If the constant for “Specify all channel numbers” is specified for the channel
numbers, all channels are processed.
Reference
getClassMXChConfig getClassMXSysInfo
CDAQMXChConfig::setDI CDAQMXChConfig::setSpan
CDAQMXSysInfo::getModuleType CDAQMXSysInfo::getTempUnit
CDAQMXConfig::setDOType
Syntax
void setDOType(int doNo, int iKind, int bDeenergize =
DAQMX_VALID_OFF, int bHold = DAQMX_VALID_OFF);
Parameters
doNo Specify the data number.
iKind Specify the DO type using channel type.
bDeenergize Specify the de-energize action using a Boolean value.
bHold Specify hold action using a Boolean value.
Description
Sets the channel type of the DO module.
If unused is specified for the channel type, the channel is set to SKIP (not used).
If the channel does not exist, the channel is not on the DO module, or the specified
type is not a DO type, the channel type is not set. If the constant for “Specify all DO
numbers” is specified for the DO data numbers, all channels are processed.
Reference
getClassMXChConfig setSKIP
CDAQMXChConfig::setDeenergize CDAQMXChConfig::setHold
CDAQMXChConfig::setType CDAQMXChConfig::setValid
CDAQMXSysInfo::getModuleType
2.5 Details of the MX100 Class