Yokogawa PC-Based MX100 User Manual
Page 1080
23-2
IM MX190-01E
Control Functions
Function
Command
Function
Switch operation mode
DS
DAQDA100. switchModeDA100
Retrieve code type
-
DAQDA100. switchCodeDA100
Switch (binary/ASCII code)
Reconfigure
RS
DAQDA100. reconstructDA100
Initialize settings
RC
DAQDA100. initSetValueDA100
Reset alarms
AR
DAQDA100. ackAlarmDA100
Set date/time (current)
SD
DAQDA100. setDateTimeNowDA100
Calculation start/stop
EX
DAQDA100. switchComputeDA100
Report start/stop
DR
DAQDA100. switchReportDA100
Establish setup mode
XE
DAQDA100. establishDA100
Generally, the status is updated at the end of the process.
Status is not updated when establishing the setup mode.
Setting (Operation Mode) Functions
Function
Command
Function
Range
SKIP (not used)
SR
DAQDA100. setRangeDA100
DC voltage input
SR
DAQDA100. setRangeDA100
Thermocouple input
SR
DAQDA100. setRangeDA100
RTD input
SR
DAQDA100. setRangeDA100
Contact input (DI)
SR
DAQDA100. setRangeDA100
DC current
SR
DAQDA100. setRangeDA100
Strain
SR
DAQDA100. setRangeDA100
Pulse
SR
DAQDA100. setRangeDA100
Power monitor
SR
DAQDA100. setRangeDA100
Diff comp between ch
SR
DAQDA100. setChDELTADA100
Remote RJC
SR
DAQDA100. setChRRJCDA100
Unit name
SN
DAQDA100. setChUnitDA100
Alarm
SA
DAQDA100. setChAlarmDA100
Becomes the channel unit setting.
The status is updated after the setting is entered.
23.1 Functions and Their Functionalities - DARWIN/C# -