Yokogawa PC-Based MX100 - Manual (Page 430)

7-32
IM MX190-01E
CDAQDARWIN::setRRJC
Syntax
int setRRJC(int refChNo, int chType, int startChNo, int
endChNo = 0, int spanMin = 0, int spanMax = 0);
Parameters
refChNo Specify the channel number of the reference channel.
chType Specify the channel type of the measurement channel.
startChNo Specify the start channel number.
endChNo Specify the end channel number.
spanMin Specify the left value of the span.
spanMax Specify the right value of the span.
Description
Sets remote RJC with respect to the specified reference channel to the
measurement channels in the specified channel range (specified by channel type,
start channel number, and end channel number).
This function executes the SR command of the DARWIN communication function.
It creates and sends the command and receives the response.
If the left and right values are the same, the span designation is considered omitted.
Return value
Returns an error number.
Reference
runCommand
CDAQDARWINChInfo::toChRange
7.4 Details of the DARWIN Class