Yokogawa PC-Based MX100 - Manual (Page 1024)

19-30
IM MX190-01E
CDAQDA100::reconstruct
Syntax
int reconstruct(void);
Description
Executes the “System reconfiguration” system control type.
Updates the status if successful.
Return value
Returns an error number.
Reference
initSystem updateAll
CDAQDA100::setChAlarm
Syntax
int setChAlarm(int chType, int chNo, int levelNo, int
iAlarmType = DAQDARWIN_ALARM_NONE, int value = 0, int
relayType = 0, int relayNo = 0);
Parameters
chType Specify the channel type.
chNo Specify the channel number.
levelNo Specify the alarm level.
iAlarmType Specify the alarm type.
value Specify the alarm value.
relayType Specify the relay type.
relayNo Specify the relay number.
Description
Sets the alarm.
If the channel type is set to the constant for “Specify all measurement channel
types,” all subunits are processed.
If the channel number is set to the constant for “Specify all channel numbers,” all
channels within the channel type are processed.
If the alarm level is set to the constant for “Specify all alarm level numbers,” all alarm
levels within the channels are processed.
Updates the status if successful.
Return value
Returns an error number.
Reference
chNumMax getClassSysInfo measInfoCh setAlarm
CDAQDARWINSysInfo::isExist
19.6 Details of the DARWIN Class