Yokogawa PC-Based MX100 - Manual (Page 985)

18-11
IM MX190-01E
MX100 Constants and Types for Extended API - Visual Basic -
18
Selected Values
Mnemonic Description
DAQMX100_CHOICE_PREV Previous value
DAQMX100_CHOICE_PRESET Specified value
Transmission Statuses
Mnemonic Description
DAQMX100_TRANSMIT_NONE No specification (unknown)
DAQMX100_TRANSMIT_RUN Output start (outputting)
DAQMX100_TRANSMIT_STOP Output stop
Initial Balance Results
Mnemonic Description
DAQMX100_BALANCE_NONE No specification
DAQMX100_BALANCE_DONE Concluded successfully
DAQMX100_BALANCE_NG Out of range
DAQMX100_BALANCE_ERROR Error
Options
Mnemonic Description
DAQMX100_OPTION_NONE No option
DAQMX100_OPTION_DS Dual Save (/DS option)
Range Types
This Extended API defines bits that differentiate between the specially-defined
ranges and the existing ranges. Differentiations can be made using logical
operations.
Mnemonic Description
DAQMX100_RANGETYPE_DI Special range type for digital input
DAQMX100_RANGETYPE_SKIP Other special range type
Reference Ranges
If this constant is specified as the measurement range of the difference computation
channel, the measurement range of the difference computation channel is set to the
same range as the measurement range of the reference channel.
The reference range is used for specification when you want to set the same range
as the reference channels to be referenced in difference computation and other
calculations.
Mnemonic Description
DAQMX100_RANGE_REFERENCE Measurement range of the reference channel.
18.2 MX100 Constants