Yokogawa FieldMate - Manual (Page 371)

App.-50
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 Acquiring Device Information
Placing the infrared receiving port on the field wireless device and the infrared port of the adapter
close together, and clicking the [Gather Device Information] button starts reading of device
information from the field wireless device. The [Provisioning Information] tab page shows such
information as manufacturer of the device, model, device revision, device EUI-64, network ID,
and battery life.
TIP
Communication may fail due to the characteristics of infrared communication. In such cases, try again.
The information displayed on the [Provisioning Information] tab page is shown in Table -H-1.
Table App.-H-1
Item Meaning
Manufacturer Device vendor name
Model Device model name
Device Revision Device revision
Device EUI-64 64-bit Address to identify the device
Network ID ID to identify network
Device tag Unique ID assigned to each device
Battery Life Battery remaining capacity
Manufacturer Device tag name
Join Status Connection between Device and Gateway
 Setting Rules of Device Tag
The following rules are prescribed for device tags which can be set in field wireless devices. This
application allows only character strings which can be set to be entered.
• Up to 16 characters
• Alphabets, numerals, hyphens, and underbars
(Capital letter of alphabets in single-byte)
 Setting Rules of Network ID
The network ID is an ID for identifying wireless networks. Decimals ranging from 2 to 65535 can
be used. The field wireless device with the same network ID as YFGW710 will be connected to
the corresponding YFGW710. How to assign network IDs depends on the user’s system design.