Yokogawa FieldMate - Manual (Page 184)

F-65
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 Relation between Segment Viewer update and DTM Works
In BRAIN, PROFIBUS and ISA100 (Infrared), while the related DTM is open, Segment Viewer
update is not effective. Close DTM and update Segment Viewer.
 Menu
Table F-5-1
Menu Description
File Exit Exits FieldMate.
View Status Bar Selects whether or not to display status bar.
Update Updates contents displayed in the window.
Scan Device Cancel Stops searching further address.
Init Current View Column Initialize the alignment of parameter items on ISA100 (Gateway)
and HART (Adaptor) in Segment Viewer.
Clear Current View Clear the device of ISA100 (Gateway) and HART (Adaptor) in
Segment Viewer.
Search Simple
Search
Search the device of ISA100 (Gateway) and HART (Adaptor) in
Segment Viewer.
Multi
Condition
Search
Size Large Changes the size of icons/characters to Large.
Medium Changes the above to Medium.
Small Changes the above to Small.
Layout Detail Displays details.
Icon Displays only the icons.
Device List by Addresses Sorts by device address.
by Tags
Sorts by device tag.
Address Format Decimal Displays device address in decimal numbers.
Hexadecimal Displays device address in hexadecimal numbers.
Action Device Viewer… Starts up Device Viewer window.
Checks the current state of operation of the device in detail.
Device Setup Starts Built-in DTM or the DTM Works or Parameter Manager
window.
Assigned DTM... Starts the DTM assigned to the device in the DTM Works window.
Select DTM... Displays the Device DTM Selection dialog box and starts the
selected device DTM in the DTM Works window.
Parameter Manager... Starts the Parameter Manager window.
DD Menu... Starts the DD Menu window.
Open Device Maintenance
Info…
Starts up device maintenance information window.
Registers the device if it is not registered.
Register Device
Maintenance Info…
Creates device maintenance information based on connected
device information.
Tag/Address Assignment… Starts up Tag/Address Assignment window.
Sets tag/address of the device.
Device Class Setting… Calls Device Class Setting window.
Sets the device class (LM or Basic).
Device Information Device Information is displayed.
(ISA100 (Gateway) only).
Device Files Setup for this
device…
Calls Device Files Setup window.
Sets up the device related files (DD, DTM, device icon) of the
selected device.