IAI America RCM-101-USB - Manual (Page 80)

5. Editing Position Data on CON Controllers and Older Models
68
5.2 Offline Mode
When editing data after creating new data or loading data from a file, you are editing the data in the offline
mode.
In this mode, the window controls relating to axis operation are grayed out, and only the toolbar buttons and
position data input area become active. Items that cannot be operated offline are grayed out.
5.2.1 Creating New Position Data
To create new position data, click File from the main menu, and then select New.
[1] When the position data format selection window appears, select the controller whose position data you
want to create, and then click OK.
Fig. 5.30 Position Data Format Selection Window
[2] The position data input window appears.
Enter position data in the position data input area.
Fig. 5.31 Position Data Edit Window (Offline Mode – New)
Tool buttons
Position data input area