E-Mon Energy Software - Manual (Page 74)

Group and Location
E-Mon Energy User Manual 7-17 E-MON
Figure 7.15 - Access Window
5 Click on the C
ONNECT
button to establish connection and access the Function and
Hardware to Access
Groups.
Scanning for Meters (Devices)
To scan for Meters (Devices):
6 From the Function group box, click on Setup Hardware.
7 From the Hardware to Access group box, click on All possible.
Figure 7.16 - Scan Recorder and Status Window
8 Click on the S
CAN R ECORDER
button. By default, E-Mon Energy™ will start scanning for
any new devices starting with IDs of 1A, 1B, … Once the new devices are detected, the grid
will display the Recorder ID and the Meter Channel Status (OK, New, Bad….)
9 Once E-Mon Energy scans and moves past the last installed device ID, wait a few seconds
and click C
ANCEL
. At this point, it will allow you to update the database.
Group and Location in
Function Buttons
Connect button