E-Mon Energy Software - Manual (Page 146)

Access Location
E-Mon Energy User Manual 14-9 E-MON
Verify AMR Button
The Verify AMR tells us the schedule, call-ins, and if the AMR is enabled and functioning properly. If an
AMR configuration mismatch occurs, a warning will display in this window. The illustration below shows a
schedule functioning properly.
Figure 14.14 - Access Location Function – Verify AMR
Columns Description
Status This column displays the condition of the device. If the condition
states “Bad” or “Timeout,” there is a possible error in reading the
device and there may be a hardware or communication issue. If the
condition is “ok,” the hardware is functioning normally.
AMR Schedule This column displays the AMR schedule setting.
Retry This column displays the number of retries the recorder will
attempt, should the call fail to go through the first time.
Enable AMR This column indicates if the Automatic Meter Reading is “enabled”
or “disabled.” Enable allows the recorder to automatically call
home at the programmed AMR Schedule. Note: Only recorders
with ID code “1A” are capable of calling home.
Warning This column displays any alarms and/or configuration errors for the
AMR setting. Note: E-Mon Energy™ compares settings
programmed into the recorder with settings stored in the database.
They should be identical.