E-Mon Energy Software - Manual (Page 155)

Error and Flags
E-Mon Energy User Manual 15-4 E-MON
How Do I Check and Clear a Flag Status?
Checking the Flag Status
To check the flag status:
At this point you have a connection to the Group Devices
1 Click on the Read Hardware radio button.
2 Click on the Flag Status button. E-Mon Energy™ will check the recorder for any potential
errors and post a flag. Note: If any columns within the grid show a “
Red ” flag, this
indicates a problem or failure.
Figure 14.7 - Flag Status Error
The flag shown in the above illustration is a Power Failure. A Power Failure indicates that the meter has lost
power at some point. The Power Failure Status displays the last power failure date and time.
Clearing a Flag Status
To clear a flag status:
3 After correcting the failure, you can reset and clear the flags by clicking on the
Clear Flag
button. The columns will reset to normal conditions.