E-Mon Energy Software - Manual (Page 65)

Group and Location
E-Mon Energy User Manual 7-8 E-MON
Figure 7.7 - Customize Group AMR-Location Detail
What is the Location Panel?
The Location panel is where you will assign the Location numbers and set up profile characteristics. These profile
characteristics include the assigned location number and name, communication parameters, AMR schedule,
password security, load control, recorder parameters, billing structure and the auto-bill cycle.
If you have already set up the AMR schedule, Rate Table, TOU Schedule or Billing Cycle on
the Group panel, you can select the Use Group checkboxes next to the feature.
The Location Number is required to create and save a position in the Group. We strongly suggest that you provide a
meaningful name for each location. All other fields can be selected later.
On the Location panel is the Communication Parameter group. These group fields can change depending on the type
of communication that you are using. The fields that cannot be changed are the Serial Port and Baud; these must be
changed from the Connection tab. The figure below illustrates the different connection groups.
TCP/IP connection
Modem
Serial Port