E-Mon Energy Software - Manual (Page 212)

Status Bar Function Codes and Error Flag Codes
E-Mon Energy User Manual B-5 E-MON
10048 The address is already in use for this operation.
10049 The address is not available from this machine.
10050 The network subsystem has failed.
10051 The network is unreachable from this machine at this time.
10052 The network has been reset.
10053 The virtual circuit has been aborted due to timeout, etc.
10054 The virtual circuit has been reset by the partner.
10055 The descriptor is not a socket, or no buffer space is available.
10056 The socket is already connected.
10057 The socket is not connected.
10058 The socket has been shutdown.
10059 WS AETOOMANYREFS
10060 The operation timed out.
10061 The attempt to connect was forcibly refused.
10062 WSAELOOP: See WSAELOOP.
10063 The name is too long.
10064 The host machine is down.
10065 The host machine is unreachable.
10066 WS AENOTEMPTY:
10067 WS AEPROCLIM:
10068 WS AEUSERS:
10069 W SAEDQUOT:
10070 WS AESTALE:
10071 WS AEREMOTE:
10091 Network subsystem is unusable.
10092 Version requested by WSAStartUp is not supported by loaded Winsock DLL.
10093 WSAStartUp not yet called.
10101 WS AEDISCON:
11001 H ost not found.
11002 Host not found, or SERVERFAIL, can try again.
11003 Non-recoverable errors, FORMERR, REFUSED, or NOTIMP.
11004 Valid name, but no data record of requested type,