E-Mon Energy Software - Manual (Page 67)

Group and Location
E-Mon Energy User Manual 7-10 E-MON
Modem Connection
Phone Number* Type in the phone number of the remote modem.
Init String 1 Type in the dial string to force your modem to comply with your
connection. Refer to your modem documentation.
Init String 2 Type in the dial string to force your modem to comply with your
connection.
Dial Timeout From this drop-down, select the time period for E-Mon Energy™ to
wait while attempting to establish the connection.
Dial Retries From this drop-down, select the number of times you want E-Mon
Energy to redial to establish the connection, should the call fail.
Ethernet Connection
Server Type in the server name.
IP address* Type in the IP address for each remote device. E-Mon Energy will
establish a TCP/IP connection to the device over the intranet or
Internet.
Port No.* Type in the Port number of the remote device.
Apply to All Connection Types
Off-hook Timeout (Min) Select the period of time that will be allowed to lapse with no
communication activities. Thereafter, E-Mon Energy will drop the
line. If you want the connection to stay on indefinitely, select 0.
Cmd Timeout Type in the preset time period when transmission error message
will occur, should E-Mon Energy not receive a response from the
recorder.
Cmd Retries Select the number of times E-Mon Energy will retry sending a
request to the recorder.
Use Connection Setup If you want the location to inherit the Connection setup file, check
the “Use Connection Setup” and all communication parameter
fields in this panel group will be populated with information from
the Connection setup tab.
AMR Schedule
(Call-In or Call-Home) Panel Group
. This panel is required if you are planning to program
the recorder to call home. Refer to “AMR” tab for details on how to
create Schedule, Task, and Server. Each of the locations within this
group have the option of inheriting this setup. Note: Schedule 2,
Task 2, and Server 2 are reserved. If you want the location to inherit
the Group AMR Schedule, check the “Use Group AMR” and all
fields in this panel group will be populated with information from
the Group tab. Using this feature allows E-Mon Energy to
automatically space the call-in times between each location.
Schedule Name Select the AMR schedule name that is created on the Schedule
panel of AMR tab in the Database window. This field will be used
to program the remote hardware via the Set Call-in AMR button in
the Access window.
Task Select the Task name that is created on the Task panel of AMR tab
in the Database window.
Server Select the Server name that is created on the Server panel of AMR
* = Required field.
* = Required field.