E-Mon Energy Software - Manual (Page 135)

Other Features
E-Mon Energy User Manual 13-4 E-MON
Time Zone Select the Time Zone where the recorder/meter is installed. E-Mon
Energy™ uses the PC time zone along with recorder/meter time zone
when adjusting the time. It is very important that both time zones are
set up correctly, otherwise incorrect time adjustment will occur.
Enable DS Time Check this box to enable automatic Day Light Savings Time
adjustment.
* = Required field.
Security
The Security feature allows the user to setup a global password in order to access the devices. Once the
Password(s) are created the user can save and synchronize them with the devices. All passwords allow a
maximum of 8 characters.
Note: This feature may not be accessible to everyone. You must have administrator rights.
Figure 13.3 - Recorder Security Password
Panel Group/Field Description
Password Definitions Panel Group
Name* Type in a unique name for your password setup. This is a required
field. This name will be referenced in the Group and/or Location tabs
of the Database window.
Description Type in a description for your password setup.
Password Panel Group
Administrator Limited access to configurations. Type in the Administrator password.
Then retype to confirm the password. Must be 8 characters. Note:
When changing password, remember to never change the
Administrator rights. The Administrator should always have “Full”
Access.
Unrestricted Full access to all functions. Type in the Unrestricted password. Then
retype to confirm the password. Must be 8 characters
Read/Bill Limited access to Read and Bill functions. Type in the Read/Bill