E-Mon Energy Software - Manual (Page 209)

Status Bar Function Codes and Error Flag Codes
tE-Mon Energy User Manual B-2 E-MON
18 0 Error: No connection Lost connection before command was
complete.
19 0 Error: Time out Did not get the proper response from
Hardware in the specified time.
20 0 Invalid cmd An unknown command was sent to the
Hardware or security level not allowing it.
21 0 Re-download For high resolution meter, the profile data
exceeds the max pulse limit. The day block
will be re-downloaded one more time.
22 0 Err: data over limit At least one of the interval data exceeds the
rated pulse. Check the Meter configuration in
the database, especially the Pulse Factor.
23 0 Err: missing day block At least one day block of interval profile data
is missing during download. The download
date will be updated.
24 0 Err: data length The profile data block has the wrong length.
Software keeps downloading but it won’t
update the download date.
25 0 Error: recr param During download, cannot get the recorder
parameter from database, download failed.
26 0 Error: database update When sending Recorder or Meter information,
failed to update the database with the
information sent. Or when download failed to
update the profile to the database.
27 0 New Location! Click [Add Location] button
to setup
When a remote recorder calls-in, E-Mon
Energy™ will query the group/location from
the device, if E-Mon Energy can not find it in
the database, it will prompt you to add a
location.
28 3 STANDBY E-Mon Energy is waiting to receive in-coming
calls (AMR). Or Access location is ready to
make the connection.
29 3 Err or
Refer to status bar panel 0 for the cause.
Modem Functions
No Status Loc Status Code Description
1 0 Modem Init Error Transmission Modem will not dial out.
2 0 Auto Answer READY E-Mon Energy is waiting to receive in-coming
calls (AMR).
3 0 Error in Auto Answer setup Failed to set the modem to “not waiting” ring.
4 0 Set Dial-Timeout Error Modem return error when sending the modem
dial timeout command.
5 0 Modem Init Timeout Modem timeout when sending the init string
to Modem.
6 0 Bad data Data is Corrupted.
7 0 Unexpected Data Data Received has wrong Check Sum.
8 0 Auto Answer completed at (time stamp) Bye command sent to Hardware .
9 0 Auto Answer terminated at (time stamp) Other disconnection than sending Bye
command.
10 0 Auto Answer line dropped at (time stamp) Line disconnected when neither hardware nor
software initiates the disconnection.
11 0 Register comport status’ Auto-answer synchronizes the comport status
with modem.
12 3 Initialize Modem… Sending initialization and configuration