E-Mon Energy Software - Manual (Page 132)

Section 13
Other Features
E-Mon Energy User Manual 13-1 E-MON
What are the Other Features?
In addition to the AMR schedule the user has an option to set up global schedules for load control, recorder
parameters, and security access features. With these global features the user can eliminate setup redundancy for the
recorder’s parameters and the security access features. The following briefly describes each of these features.
Load Control
The Load Control feature allows the user to setup a global Load Control that will set the high and low
threshold set points before an alarm is activated. Each Load Control can be saved with a unique name for
selection on the meter tab. Once selected, these configurations are then set to the meter. For additional
information, see section on Meters within this manual.
Figure 13.1 - Recorder Load Control
Panel Group/Field Description
Load Control
Panel Group
Name* Type in a unique name to identify your Load Control. The name can
be up to 20 characters. This is a required field. This name will be
referenced in the Group and/or Location tabs of the Database
window.
Description Type in a description to identify the Load Control.
Threshold Set Point Panel Group
Alarm at high set point Check this box if you want to enter the High Set point value.
High Set Point Type in the High Set Point value.
Alarm at low set point Check this box if you want to enter the Low Set Point value.