E-Mon Energy Software - Manual (Page 68)

Group and Location
E-Mon Energy User Manual 7-11 E-MON
tab in the Database window. This field will used to program the
remote hardware via the Set Call-in AMR button in the Access
window.
Event Server This is a reserved field.
Init String 1 Type in the primary init string to program the remote hardware for
setting up the communication module, (e.g., modem).
Init String 2 Type in the secondary init string to program the remote hardware
for setting up the communication module, (e.g., modem).
Enable AMR Check “Enable AMR” to activate this feature.
Use Group AMR If you want the location to inherit the Group AMR Schedule, check
the “Use Group AMR” and all fields in this panel group will be
populated with information from the Group tab. Using this feature
allows E-Mon Energy™ to automatically space the call-in times
between each location.
Use Locn Task When using the “Use Group AMR” option, if you want to overwrite
the Group AMR Task with the Location AMR Task, check this box
and select the Task name from the drop-down box. This option is
useful in programming some of the locations in the group to
perform special functions when calling in.
Use Locn Server When using the “Use Group AMR” option, if you want to overwrite
the Group AMR Server with the Location AMR Server, check this
box and select the Server name from the drop-down box. This
option is useful in configurations where some of the remote sites in
the group need to dial a special code to get out side access, (i.e.,
dialing a ‘9’ first prior to dialing the number).
Security Panel Group
Password Select the preset password assigned for that Group. The security
setup is used to program the recorder(s) and for software log-on.
Refer to the “Others” tab for details.
Use Group If you want the location to inherit the Group security, check the
“Use Group” and the field in this panel group will be populated
with information from the Group tab.
Load Control Panel Group
. This panel is required if utilizing the Load Control
feature. Refer to “Others” tab for details on how to create Load
Control parameters. Each of the locations within this group have the
option of inheriting this setup. This is a reserved feature.
Primary Select a primary Load Control name. Check the “Enable” box to
activate this feature.
Secondary This is a secondary Load Control name, similar to the primary.
Check the “Enable” box to activate this feature.
Use Group Load Control If you want the location to inherit the Group Load Control, check
the “Use Group Load Control” and all fields in this panel group will
be populated with information from the Group tab.
Recorder Parameters Panel Group
Setup File Select a Setup Recorder Parameter that is created on the Other tab,
Recorder panel of the Database window.
Use Group If you want the location to inherit the Group setup file, check the
“Use Group” and all fields in this panel group will be populated
with information from the Group tab.