E-Mon Energy Software - Manual (Page 142)

Access Location
E-Mon Energy User Manual 14-5 E-MON
Profile Status Button
The Profile Status tells us when and how far into the “Moving” window we are before we need to upload the
current sampling rate data from the Recorder. It also tells us how many days we have left before data will be
lost. The following describes each column of data returned from the devices.
Figure 14.9 - Access Location Function – Profile Status
Columns Description
Status This column displays the condition of the device. If the condition
states “Bad” or “Timeout,” there is a possible error in reading the
device and there may be a hardware or communication issue. If the
condition is “ok,” the hardware is functioning normally.
Start Date This column displays the date and time of the first day block that is
currently in the data recorder storage. If all day blocks are used, this
date/time will start to flush the oldest data out making room for new
data.
Days This column displays how many day blocks of interval data are
stored.
Rate This column displays the sampling rate. Typically, we default to 15-
minute interval storage.
State This column displays the current profile status. It should always be
“on”.
Downloaded Thru This column displays the last time you downloaded the data.
To Avoid Data Lost This column is a “Reminder” which displays how many days are
remaining until a required download is needed.