E-Mon Energy Software - Manual (Page 51)

Automatic Meter Reading (AMR) System
E-Mon Energy User Manual 6-4 E-MON
What is the TASK Panel?
The Task Panel contains “To-Do List” selections that we can program in E-Mon Energy™ to perform during the
AMR call-in or AMR call-out session.
Figure 6.5 - Task Panel
Panel Group/Field/Checkbox Description
Task (To-do-list) Panel Group
Name* A Name for your To-do list. This is a required field and must be
unique. This name will be used in setting up recorders for calling
in/out. This name will be referenced in the Group and/or Location
tabs of the Database window.
Download
Checked
= Download interval data from recorder.
Not Checked
= No Download.
Select “New data only
” = E-Mon Energy downloads only new data.
Or select “All available data
” = E-Mon Energy downloads all data,
overwriting the ones in the database.
Save data as HHF
= Will save data as HHF format (Hand-Held
Format). MV-90 normally imports this format for interval data.
Save data as CSV
=Will save data as CSV format (Comma-
Separated Value). Collects data from the table so that it can be put
into another table-oriented program (i.e., Excel, or a relational
database application).
Flags
Checked
= Will check flags (i.e., status, power failure, tamper
alarm, over load)
Not Checked
= Will not check flags (i.e., status, power failure,
tamper alarm, over load)
Initialize Recorder
= If recorder configurations are corrupted
(RAM corruption or real-time clock is bad), E-Mon Energy will
initialize the recorder.
Not Checked Initialize recorder
= Will not initialize the recorder.