Mapping the input and output data, Commissioning english, Mapping� the input and output data – Burkert Type 8645 User Manual
Page 157
CommissioninG
English
8645 - 157
Confirm the values with OK.
Confirm the following two messages with “yes”
Confirm the message with OK.
Download the changes.
This completes the configuration.
Mapping� the Input and Output data
Using our example, the I/O data mapping is shown.
Module
Number
Module
Required
Input bytes
Required
Output bytes
1
Hub DVN
2
2
2
1. interior module
2
2
2. interior module
2
2
5
1. RIO 8645
2
2
6
RIO 8640
4
7
2. RIO 8645
2
2
8
. RIO 8645
2
2
Total:
16
15
Depending upon the configuration, an additional byte (diagnosis byte) is added to the number of necessary
input bytes.
In the following example, the configuration with a diagnosis byte has been chosen.
Input data Allocation
bits
15 to 0
Module
Number
Module Allocation
I:1.1
1
Hub DVN
I:1.2
2
1. interior module
I:1.
2. interior module
I:1.4
5
1. RIO 8645
I:1.5
6
RIO 8640
I:1.6
6
RIO 8640
I:1.7
7
2. RIO 8645
I:1.8
8
. RIO 8645
I:1.9
Diagnosis Byte
Illustration: Input Data Allocation