Burkert Type 8645 - Manual (Page 10)

10 - 8645
General informaTion
English
INTENdEd uSE
The FreeLINE Type 8645 modular, electrical and pneumatic automation system may only be used for the appli-
cations described in chapter FreeLINE System Description and only in conjunction with equipment and com-
ponents from other companies recommended or approved by Bürkert.
Observe the instructions in this operating manual, as well as the conditions of use and permissible data speci-
fied in the chapter Technical Data.
The proper and safe functioning of the system depends on proper transport, storage and installation, and on
careful operations and maintenance.
Use in any other way does not constitute an intended use.
LIMITATIONS
Pay attention to any limitations if the system is to be exported.
FORESEEABLE MISuSE
• Do not supply aggressive or inflammable media to the media connections of the system. Do not supply aggressive or inflammable media to the media connections of the system.
• Do not supply fluids to the media connections of the system. Do not supply fluids to the media connections of the system.
• Do not subject the housing to mechanical loads (e.g. by placing objects on the housing or using the Do not subject the housing to mechanical loads (e.g. by placing objects on the housing or using the
housing as a step).
ELEcTROSTATIc chARGES
cAuTION!
The system contains electronic components that react sensitively to electrostatic dischar-
ge (ESD).
Contact with electrostatically charged persons or objects can endanger these compo-
nents. In the worst case, they will immediately be destroyed or fail after commissioning.
Observe the requirements of EN 100 015-1 in order to avoid or minimise the risk of dam-
age caused by sudden electrostatic discharges. Also ensure that you do not touch elec-
tronic components when the supply voltage is switched on.
ScOPE OF SuPPLy
Immediately after receiving the shipment, ensure that the contents are not damaged and that the contents are
as listed on the shipping documents.
If there are discrepencies, please immediately contact us.
Germany
Contact information:
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 1-17
D-7465 Ingelfingen
Tel. : 07940 - 10 111
Fax: 07940 - 10 448
E-mail: [email protected]