Burkert Type 8650 User Manual

Operating instructions, Type 8650 airline ex

Operating Instructions

Bedienungsanleitung
Instructions de Service

Type 8650
AirLINE Ex

Electrical and Pneumatic Automation System

Table of contents

Document Outline

General Information and Safety Instructions
- 1. Operating Instructions
- 2. Intended Use
- 3. Basic safety instructions
- 4. General Information
System Description
- 1. General Description
- 2. Technical Data
- 3. System Accessories
Configuration and Function
- 1. Configuration
- 2. Function
Configuration and Function of the Modules
- 1. Supply Segments
- 2. Valve segments
- 3. Pneumatic Connector Module
- 4. Basic Pneumatic Module
- 5. Terminal module
- 6. Electronic Module
- 7. Valve that can be integrated
Installation
- 1. Safety Instructions
- 2. Installation Instructions
- 3. Installation on S7 Profile Rail (Pre-assembled System)
- 4. Installation in the control cabinet
- 5. Configuration, Conversion and Expansion of an existing system with individual segments
- 6. Removal / Installation of individual Segments
- 7. Removal / Installation of the Cover flaps
- 8. Replacing a terminal or pneumatic module
- 9. Replacing a valve
- 10. Connection of the Air Inlet and Exhaust Lines
Commissioning
- 1. Safety Instructions
- 2. Initialization
- 3. SD Card / System Serialization Data
Maintenance and Repair
- 1. Safety Instructions
- 2. Maintenance
- 3. Maintenance
Storage, Packaging, Transport, Disposal
- 1. Storage
- 2. Packaging, Transport
Annex
- 1. EC Declaration of Conformity
- 2. EC-Type Examination Certificate Terminal modules
- 3. IEC-Ex Certificate of Conformity Terminal modules
- 4. EC-Type Examination Certificate Electronic modules
- 5. IEC-Ex Certificate of Conformity Electronic modules
- 6. EC-Type-Examination certificate 11 mm-Valves Type 6104
- 7. IEC-Ex Certificate of Conformity 11 mm-Valves Type 6104
- 8. EC-Type-Examination Certifcate 16,5 mm-Valves Type 6106
- 9. IEC-Ex Certificate of Conformity 16,5 mm-Valves Type 6106
- 10. EC-Type-Examintation Certificate 11 mm-Valves Type 6144
- 11. IEC-Ex Certificate of Conformity 11 mm-Valves Type 6144
1. Operating Instructions
- 1.1. Symbols
2. Intended Use
- 2.1. Restrictions
3. Basic safety instructions
4. General Information
- 4.1. Contact address
- 4.2. Warranty
- 4.3. Approvals
- 4.4. Information on the Internet
- 4.5. Trademarks
1. General Description
- 1.1. Product Description
- 1.2. Characteristic Features and Benefits
- 1.3. Field of Application
- 1.4. Marking
2. Technical Data
- 2.1. General Technical Data
- 2.2. Dimensions
3. System Accessories
1. Configuration
- 1.1. Maximum System Configuration
- 1.2. Configurator
- 1.3. Siemens SIMATIC ET 200iSP System Components
- 1.4. Bürkert AirLINE Ex - System Components
2. Function
- 2.1. View of the Overall System
- 2.2. Functional representation of the AirLINE Ex-system
1. Supply Segments
- 1.1. Configuration and function
- 1.2. Technical Data
- 1.3. Pneumatic Connections
- 1.4. Displays
- 1.5. Spare parts
2. Valve segments
- 2.1. Configuration and Function
- 2.2. Technical Data
- 2.3. Pneumatic Connections
- 2.4. Displays
- 2.5. Channel Assignment
- 2.6. Diagnosis (Electronic Module)
- 2.7. Accessory
- 2.8. Spare parts
3. Pneumatic Connector Module
- 3.1. Configuration and Function
- 3.2. Technical Data
- 3.3. Pneumatic Connections
4. Basic Pneumatic Module
- 4.1. Configuration and Function
- 4.2. Technical Data
- 4.3. Pneumatic Connections
- 4.4. Accessory
5. Terminal module
- 5.1. Configuration and Function
- 5.2. Marking
- 5.3. Technical Data
6. Electronic Module
- 6.1. Configuration and Function
- 6.2. Marking
- 6.3. Technical Data
- 6.4. Displays
- 6.5. Diagnosis
- 6.6. Spare Parts
7. Valve that can be integrated
- 7.1. Pneumatic Valves Type 6524/6525 (station width 11 mm)
- 7.2. Pneumatic Valves Types 6526/6527 (station width 16.5 mm)
1. Safety Instructions
2. Installation Instructions
- 2.1. Unpacking pre-assembled systems
- 2.2. Installation Tools and Torques
- 2.3. Position of the Assemblies
3. Installation on S7 Profile Rail (Pre-assembled System)
- 3.1. Removing a System from a Profile Rail
- 3.2. Installation/Removal of the ET 200iSP-Modules
4. Installation in the control cabinet
5. Configuration, Conversion and Expansion of an existing system with individual segments
- 5.1. System Configuration
- 5.2. Conversion and Expansion
- 5.3. Assembly
6. Removal / Installation of individual Segments
- 6.1. Removal
- 6.2. Installation
7. Removal / Installation of the Cover flaps
- 7.1. Installation
- 7.2. Removal
8. Replacing a terminal or pneumatic module
9. Replacing a valve
- 9.1. Installation instructions
- 9.2. Installation
10. Connection of the Air Inlet and Exhaust Lines
- 10.1. Connection of the Pressure Supply
- 10.2. Connection of the Exhaust Air
- 10.3. Pilot Exhaust Air / Auxiliary Control Air
- 10.4. Plug to Block P-channel
1. Safety Instructions
2. Initialization
- 2.1. Communication Connection
3. SD Card / System Serialization Data
- 3.1. Serialization Data Record
1. EC Declaration of Conformity
- 1.1. Standards used for CSA-, FM-Ex and IEC-Ex-certification
- 1.2. Set-Up of the Type 8650 System for Certification Conformity
- 1.3. Certificates
2. EC-Type Examination Certificate Terminal modules
3. IEC-Ex Certificate of Conformity Terminal modules
4. EC-Type Examination Certificate Electronic modules
5. IEC-Ex Certificate of Conformity Electronic modules
6. EC-Type-Examination certificate 11 mm-Valves Type 6104
7. IEC-Ex Certificate of Conformity 11 mm-Valves Type 6104
8. EC-Type-Examination Certifcate 16,5 mm-Valves Type 6106
9. IEC-Ex Certificate of Conformity 16,5 mm-Valves Type 6106
10. EC-Type-Examintation Certificate 11 mm-Valves Type 6144
11. IEC-Ex Certificate of Conformity 11 mm-Valves Type 6144