Termination module, Displays, Configuration and function – Burkert Type 8645 User Manual
Page 111: Config�uration and function, Configuration and function of the modules english
ConfiGuraTion anD funCTion of The moDules
English
8645 - 111
displays
1
1
1
1
1
1
1
1
LED of the 24 v outputs
LED ON - feedback
LED OFF - no feedback
Legend
1 LED of the 24 V outputs
Illustration: Displays on the Module 8 Digital Outputs M8
1
1
1
1
LED of the 24 v outputs
LED ON - feedback
LED OFF - no feedback
Legend
1 LED of the 24 V outputs
Illustration: Displays on the Module 8 Digital Outputs M12
TERMINATION MOduLE
config�uration and Function
The Termination module serves as both an electrical and a pneumatic
Termination.
Fieldbus variant
In the Fieldbus variation, the Termination module contains the Termi-
nation resistor for the internal bus.
Multipole variant
The multipole variant contains no Termination resistor.
NOTE!
The Termination module is not mounted on a
wall or DIN rail.
It is held only via the locking bolts.
Illustration: Termination module