Rainbow Electronics MG260 - Manual (Page 89)

FLYFOT-MG260-MODULE
Page: 89 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Defined values
“GSM” GSM default alphabet.
“HEX” Hexadecimal mode. No character set used ; the user can read or write hexadecimal values.
9.20 Select Cell Broadcast Message Types +CSCB
Description
This command selects which types of CBMs are to be received by the ME. It is allowed in both PDU and
text modes.
Syntax
Command syntax : AT+CSCB= , [ , [ ] ]
Important note : Test read command (AT+CSCB ?) is not supported.
Command
Possible responses
AT+CSCB=0,.15-17,50,86.,..
Note : Accept SMS-CB types, 15,16,17,50
and 86 in any language OK
Note : CBMs can be received
+CBM : 10
00112233445566778899
Note : CBM length of a received Cell
Broadcast message (SMS-CB), CBM bytes in
PDU mode)
AT+CSCB=1
Note : Deactivate the reception of CBMs OK
Note : CBM reception is completely stopped
Defined values
The parameter of +CNMI command controls the message indication. The activation of CBM
reception (=0) can select only specific Message Identifiers (list in ) for specific Languages
(list in ), but the deactivation stops any reception of CBMs (only AT+CSCB=1 is allowed) Message
Identifiers ( parameter) indicates to which type of message identifiers the ME should listen.
: Supported languages
0 German
1 English
2 Italian
3 French
4 Spanish
5 Dutch
6 Swedish
7 Danish
8 Portuguese
9 Finnish