Rainbow Electronics MG260 - Manual (Page 192)

FLYFOT-MG260-MODULE
Page: 192 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Command Possible responses
AT+WCDM=0 OK
Note : Select no melody
AT+WCDM=5 OK
Note : Select melody n°5
AT+WCDM? +WCDM: 5,0
Note : Indicate the current melody OK
Note : Melody n°5 is currently selected,
and the buzzer is selected to play it.
RING
Note : An incoming call occurs, and the
melody n°5 is played on the buzzer.
AT+WCDM=5,1 OK
Note : Select the speaker to play the
melody on.
AT+WCDM? +WCDM: 5,1
OK
Note : Now the speaker is selected to play the
melody if an incoming call occurs.
Defined values
0 : No melody (default)
1 - 10 : Melody 1 to 10
0 : Melody n° will be played on the buzzer for any new incoming voice call. (default)
1 : Melody n° will be played on the speaker for any new incoming voice call.
18.24 FLYFOT Software version +WSSW
Description :
This specific command displays some internal software reference.
Syntax :
Command syntax : AT+WSSW