Rainbow Electronics MG260 - Manual (Page 103)

FLYFOT-MG260-MODULE
Page: 103 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Defined values:
0: Disable the result code presentation
1: Enable the result code presentation
2: Cancel session (not applicable to read command response)
0: no further user action required (network initiated USSD-Notify, or no further information needed after
mobile initiated operation)
1: further user action required (network initiated USSD-Request, or further information needed
after mobile initiated operation)
2: USSD terminated by network
4: Operation not supported
: network string (name), converted in the selected character set
: the data coding scheme received (GSM TS 03.38).
Syntax To send and receive USSD:
Command syntax: AT+CUSD= [, [,]]
Note : Please, be aware that the send USSD command needs the user to re-enter the parameter !
Defined values To send and receive USSD :
is the USSD string to be sent.
the default alphabet and the UCS2 alphabet are supported.
When the product sends a USSD, an OK response is first returned, and the intermediate +CUSD indication
comes subsequently.
In case of error, a “+CUSD:4” indication is returned.