Rainbow Electronics MG260 - Manual (Page 201)

FLYFOT-MG260-MODULE
Page: 201 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Command Possible responses
AT+CPHS=1,4 OK
Note :Activate the Divert Call
indicator feature.
AT+CPHS=2,4 Note :Get the current status of
Divert +WDCI: 1,1
divert call indicator is active on LINE 1
+WDCI: 2,1
divert call indicator is active on LINE 2
call indicator. +WDCI: 3,0 divert call indicator is deactivate on Data
+WDCI: 4,1 divert call indicator is active on Fax
AT+CPHS=2,4 +CME ERROR: 3
Note :CPHS Feature is not allowed
AT+CPHS=1,4 OK
Note :Activationof Divert call Note :The Divert call indicator feature is
indicator feature. activated
+WDCI: 1,1
Note :Call forwarding is activate on Line 1
Defined values
1 : Line 1
2 : Line 2
3 : Data
4 : Fax
,
0 : Call forwarding is deactivated
1 : Call forwarding is activated
Note : The call forwarding SS is set by the AT+CCFC command.
18.30 FLYFOT network operator name: +WNON
Description
This indication provides the name of the network operator (as a character string). This command is the
response to the AT+CPHS 2,5[,] command.
Syntax
Command : AT+CPHS=2,5[,]
Response syntax : +WNON:,