Rainbow Electronics MG260 User Manual
Page 235
![background image](/manuals/281850/235/background.png)
FLYFOT-MG260-MODULE
Page: 235 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
19.3 Specific error result codes
Meaning
Resulting from the following commands
500
unknown error.
All commands
512
MM establishment failure (for SMS).
+CMGS, +CMSS (+CMS ERROR: 512)
513
Lower layer failure (for SMS)
+CMGS, +CMSS (+CMS ERROR: 513)
514
CP error (for SMS).
+CMGS, +CMSS (+CMS ERROR: 514)
515
Please wait, init or command processing in
progress.
All commands ( “+CME ERROR: 515” ERROR: 515”) or “+CMS
517
SIM Toolkit facility not supported.
+STGI
518
SIM Toolkit indication not received.
+STGI
519
Reset the product to activate or change a new
echo cancellation algo.
+ECHO, +VIP
520
Automatic abort about get plmn list for an
incoming call.
+COPS=?
526
PIN deactivation forbidden with this SIM card.
+CLCK
527
Please wait, RR or MM is busy. Retry your
selection later.
+COPS
528
Location update failure. Emergency calls only.
+COPS
529
PLMN selection failure. Emergency calls only.
+COPS
531
SMS not sent : the
phonebook, and FDN lock is enabled. (for SMS)
+CMGS, +CMSS (+CMS ERROR: 531)
532
the embedded application is activated so the
objects flash are not erased
+WOPEN
533
Missing or Unknown APN
ATD*99 +GACT +CGDATA
19.4 Failure Cause from GSM 04.08 recommendation (+CEER)
Cause value
Diagnostic
1
Unassigned (unallocated) number
3
No route to destination
6
Channel unacceptable
8
Operator determined barring
16
Normal call clearing
17
User busy
18
No user responding
19
User alerting, no answer
21
Call rejected
22
Number changed