Rainbow Electronics MG260 - Manual (Page 186)

FLYFOT-MG260-MODULE
Page: 186 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Note : Reset the product at the end
OK
Note : reset completed, new software
running
Defined values :
No parameter
18.15 FLYFOT Voice Rate +WVR
Description :
This specific command allows the voice rate for bearer voice to be configured (available for outgoing
calls only).
Syntax :
Command syntax : AT+WVR=
Command Syntax Return
AT+WVR=? +WVR: (0,2,3)
Note : Half Rate available.
AT+WVR=? +WVR: (0,1)
Note : If EFR available.
AT+WVR=? +WVR: (0)
Note : If HR and EFR not available
AT+WVR=? +WVR: (0-5)
Note : If HR and EFR available
AT+WVR? +WVR:
Command Possible responses
AT+WVR=1 OK
Note : Configure voice type FR and EFR Note : Bearer is configured
AT+WVR=6 +CME ERROR: 3
Note : Syntax error
Syntax error
AT+WVR? +WVR: 1
Note : Ask for the current value OK
Defined values :
: Voice coding type.
0: FR
1: FR and EFR