Rainbow Electronics MG260 - Manual (Page 57)

FLYFOT-MG260-MODULE
Page: 57 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
AT+CPWD=”SC”,1234,5555
Note : Change PIN OK
Note : PIN was correct
AT+CPWD=”SC”,1234,5555
Note : Change PIN +CME ERROR: 16
Note: PIN was wrong
AT+CPIN=5555
Note : Enter PIN OK
Note : PIN was correct
AT+CPWD=”PN”,12345678,00000000
Note : Change NCK OK
Note : NCK changed for net lock
Defined values :
: facility
z “PS”
z “SC”
z “AO”
z “OI”
z “OX”
z “AI”
z “IR“
z “AB”
z “AG”
z “AC”
z “P2”
z “FD”
z "PN"
z "PU"
z "PP"
z "PC"
,
On 4 or up to 8 or 16 digits accprding to the facility.
7.5 Enter PIN2/PUK2 +CPIN2
Description :
This specific command is used to validate the PIN2 code (CHV2), or to validate the PUK2 code (UNBLOCK
CHV2) and to define a new PIN2 code.
PIN2 length is between 4 and 8 digits, PUK2 length is 8 digits only.
Syntax :
Command syntax : AT+CPIN2 =