Rainbow Electronics MG260 - Manual (Page 76)

FLYFOT-MG260-MODULE
Page: 76 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
2: SMS-DELIVERs (except class 2 messages) are routed using unsolicited
+CMT : [,]
3: Class 3 SMS-DELIVERS are routed directly using code in =2 ; Other classes messages
result in indication =1
: defines the rules for storing the received CBMs (Cell Broadcast Message) types. They depend also
on the coding scheme (text or PDU) and the setting of Select CBM Types (see +CSCB command). Default
is 0.
0: No CBM indications are routed to the TE. The CBMs are stored.
1: The CBM is stored and an indication of the memory location is routed to the customer application
using unsolicited result code: +CBMI: “BM”,
2: New CBMs are routed directly to the TE using unsolicited result code.
+CBM: (PDU mode enabled)
or
+CBM: ,,,, (text mode enabled)
3: Class 3 CBMs : as =2. Other
classes CBMs : as =1.
for SMS-STATUS-REPORTs. Default is 0.
0: No SMS-STATUS-REPORTs are routed.
1: SMS-STATUS-REPORTs are routed using unsolicited code :
+CDS : (PDU mode) or
Default is 0.
0: TA buffer of unsolicited result codes defined within this command is flushed to the TE when
= 1 to 3 is entered (OK response shall be given before flushing the codes)
1: TA buffer of unsolicited result codes defined within this command is cleared when
1…3 is entered.
9.7 Read message +CMGR
Description :
This command allows the application to read stored messages. The messages are read from the memory
selected by +CPMS command.
Syntax :
Command syntax : AT+CMGR=
Response syntax for PDU mode :
+CMGR: , [] ,
Note :
The parameter for SMS Status Reports is always 0.