Rainbow Electronics MG260 - Manual (Page 38)

FLYFOT-MG260-MODULE
Page: 38 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Syntax :
Command syntax : AT+VIP=
Command
Possible responses
AT+VIP?
+VIP: 1
OK
AT+VIP=2
Note : Syntax error +CME ERROR: 3
AT+VIP=1
Note : Restore the factory settings from EEPROM OK
Note : The command has been executed
AT+VIP=1
Note : Restore the factory settings from EEPROM
with the current Echo cancellation algo (different of
the default algo).
CME ERROR: 519
Note : Reset the product to accept the new algo.
AT+VIP=?
Note : List of supported s +VIP: (1)
OK
Defined values :
1 : Restore all voice parameters
Other values are not supported.
5.15 Ring Melody Playback +CRMP
Description
This command allows a melody to be played. All melodies are manufacturer
defined.
For incoming voice, data or fax calls, 10 manufacturer-defined melodies can be
played back (in a loop).
Note:
loop melodies (for voice/data/fax call) must be stopped by a +CRMP command
with the field set to 0 (example: +CRMP=0,,,0).
When the parameter is given, this overwrites the
value of the +CRSL command. If the parameter is not given, the
value of +CRSL is used as default value.
Syntax :
Command syntax : AT+CRMP=[,,,]