Rainbow Electronics MG260 User Manual

Page 217

FLYFOT-MG260-MODULE

Page: 217 / 246

This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.

Syntax :

Command syntax : AT+WSST=[][,]

Command

Possible responses

AT+WSST=0

Note : Set volume to Max.

AT+WSST=15

Note : Set volume to Min.

AT+WSST=,5

Note : Set ring tone level to 5

AT+WSST?

+WSST: 15,5

Note : getcurrent standard tones sound level

Note : current standard tones level is

15 (mini.), and ring tone level is 5.

AT+WSST=?

+WSST: (0-15),(0-15)

Note : supported parameters

Defined values :

Range [0 ; 15]
0 : Maximum volume (default)
15 : Minimum volume

18.44 FLYFOT Location +WLOC

Description :

This specific command can be used by the application to retrieve the following
local informations : MCC-MNC, LAC, CI, Network measurement, BCCH channel
list, Timing Advance, Date and Time.

Two ways exist for the external application to get these information : on
request of the application, or automatically by the module every x seconds (x
has to be a multiple of 5 different from 0).