Rainbow Electronics MG260 - Manual (Page 205)

FLYFOT-MG260-MODULE
Page: 205 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
+WBCI: 2,4060
Note : Unsolicited charge indication: the
current battery voltage is 4.06 V. (See
+WBCIdescription)
AT+WBCM=1,0 OK
Note :Start the battery charging
without charge indications.
AT+WBCM=2
Note :Get the battery voltage during the charging. +WBCI: 2,4110
OK
Note : See the description of+WBCI unsolicited
response. The current battery voltage is 4.11 V.
Command Possible responses
+WBCI: 1
Note :The battery voltage has reached
the max level. The battery is considered
as charged and the charging is stopped.
AT+WBCM? +WBCM: 0,0,4200,3300,100,5000,0
OK
Note :Current values.
AT+WBCM=0,1 OK
Note :Enable the battery charge
unsolicited indications out of charge.
+WBCI: 3,4195
Note :The current battery voltage is 4.195 V.
AT+WBCM=3,0,4800,3000,500,3000 OK
,0
Note :Configure the battery charging
parameters.
AT+WBCM=? +WBCM: (0-3),(0-1),(4000-5000),(2800-
Note :Get the parameters range. 3800), (100-10000),(100-10000),(0-255)
OK
+WBCI: 0
Note : The battery voltage has reached the min level.
The battery is considered as discharged, and the
product is turned off, with the +CPOFcommand
behavior.