Rainbow Electronics MG260 - Manual (Page 185)

FLYFOT-MG260-MODULE
Page: 185 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Note : Play a DTMF tone Note : Done
AT+WDTMF=0 OK
Note : Stop playing Note : Done
AT+WDTMF=? +WDTMF: (0-1),(0-9,*,#,A-D),(0-
Note : Test command 15),(0-50)
OK
Note : Done
AT+WDTMF? ERROR
Note : Current value Note :
Defined values :
0: Stop playing.
1: Play a DTMF tone
: This parameter sets the DTMF to play (mandatory if =1).
Value must be in {0-9,*,#,A-D}
: This parameter sets tone gain. The values are identical to those of the +WTONE (speaker)
command. The default value is 9.
Range of values is 0 to 15 (see array on §18.11.3)
: This parameter sets the tone duration (in unit of 100 ms).
Range of values is 0 to 50 (0 is default value, 1 -> 0,1 s., 50 -> 5 s.)
Remark : when = 0, the duration is infinite, and the DTMF tone can be stopped by
AT+WDTMF=0.
18.14 FLYFOT Downloading +WDWL
Description :
This specific command switches the product to download mode. Downloading is performed using the
1K-XMODEM protocol.
Syntax :
Command syntax: AT+WDWL
Command Possible responses
AT+WDWL Note : Switch on downloading mode +WDWL: 0 Note : Start the downloading
…
Note : Downloading in progress
AT+CFUN=1