Rainbow Electronics MG260 - Manual (Page 17)

FLYFOT-MG260-MODULE
Page: 17 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged
without prior written agreement.
Syntax :
Command syntax : AT+CGSN
Command
Possible responses
AT+CGSN
Note: Get the IMEI 012345678901234
OK
Note: IMEI read from EEPROM
AT+CGSN
Note: Get the IMEI +CME ERROR: 22
Note: IMEI not found in EEPROM
AT+ CGSN =? OK
AT+ CGSN?
AT+ CGSN =1 +CME ERROR 3
Note: not support
4.7 Request IMSI +CIMI
Description :
This command is used to read and identify the IMSI (International Mobile Subscriber Identity) of
the SIM card. The PIN may need to be entered before reading the IMSI.
Syntax
Command syntax : AT+CIMI
Command
Possible responses
AT+CIMI
Note : Read the IMSI
208200120320598
OK
Note : IMSI value ( 15 digits ), starting with
MCC ( 3 digits ) / MNC ( 2 digits, 3 for PCS
1900 )
AT+ CIMI =? OK
AT+ CIMI?
AT+ CIMI =1 +CME ERROR 3
Note: not support
See appendix 16.12 for MCC / MNC description.
4.8 Card Identification +CCID
Description :
This command orders the product to read the EF-CCID file on the SIM card.
Syntax :
Command syntax : AT+CCID
Command
Possible responses
AT+CCID
Note : Get card ID +CCID: “123456789AB111213141”
Note : EF-CCID is present, hexadecimal format