Rainbow Electronics MG260 - Manual (Page 149)

FLYFOT-MG260-MODULE
Page: 149 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
15.6 Set DSR signal &S
Description :
This commands controls the Data Set Ready (DSR) signal.
Syntax :
Command syntax : AT&S
Command
Possible responses
AT&S0
Note : DSR always on OK
Note : Command valid
AT&S1
Note : DSR off in command mode, DSR on in
data mode OK
Note : Command valid
Defined values:
0 : DSR always on
1 : DSR off in command mode, DSR on in data mode
15.7 Back to online mode O
Description
If a connection has been established and the ME is in command mode, this command allows you to return
to online data mode.
Syntax
Command syntax : ATO
Defined values :
No parameter