Rainbow Electronics MG260 - Manual (Page 71)

FLYFOT-MG260-MODULE
Page: 71 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
9 Short Messages commands
Note: At present, MG260 only support “SM” storage.
9.1 Parameters definition
Destination Address, coded like GSM 03.40 TP-DA
Data Coding Scheme, coded like in document [5].
Discharge Time in string format :
“yy/MM/dd,hh:mm:ss±zz”(Year [00-99], Month [01-12],
Day [01-31], Hour, Minute, Second and Time Zone [quarters of an hour] )
First Byte, coded like SMS-SUBMIT first byte in document [4],
Default value is 17 for SMS-SUBMIT
Place of storage in memory.
PDU mode (+CMGF=0): length of the TP data unit in bytes
Memory used to list, read and delete messages (+CMGL, +CMGR and +CMGD).
Memory used to write and send messages (+CMGW, +CMSS).
CBM Message Identifier.
Message Reference.
Originator Address.
Protocol Identifier.
For SMS : GSM 04.11 SC address followed by GSM 03.40 TPDU in hexadecimal format,
coded as specified in doc [4] For CBS : GSM 03.41 TPDU in hexadecimal format
Recipient Address.
Service
Center Address
Service Center Time Stamp in string format :
“yy/MM/dd,hh :mm :ss±zz”
(Year/Month/Day,Hour:Min:Seconds±TimeZone)
CBM Serial Number
Status of a SMS-STATUS-REPORT
Status of message in memory.
Type-of-Address of .
Type-of-Address of .
Type-of-Address of .
Number of message locations in .
Number of messages locations in
Total number of messages locations in .
Total number of messages locations in
Validity Period of the short message, default value is 167