Rainbow Electronics MG260 - Manual (Page 164)

FLYFOT-MG260-MODULE
Page: 164 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
new connection.
OK
Parameter
none
Reference
note
17.5 AT+CLPORT
AT+CLPORT Set local TCP or UDP port
AT+ CLPORT =
"TCP"/"UDP","PO
RT"
Response
This command is used to set local port for connection. In default, Local
port 2020 is used for TCP connection and 3030 is used for UDP
connection.
Parameter
”TCP” : Set local TCP port
”UDP” : Set local UDP port
”PORT”： port number range from 0 to 65535
Reference Note
17.6 AT+CSTT
AT+CSTT Set APN, user name, password for GPRS attachment
AT+ CSTT =
，ID>，
Response
This command is used to set APN, user name and password for GPRS
attachment
OK
Parameter
APN=“CMNET”，access point name
USER ID=“”，
PASSWORD=“”
Reference Note
17.7 AT+CIICR
AT+CIICR Attach to GPRS network
Test command
AT+
CIICR
Response
This command is used to activate a PDP context or establish a
CSD connection for wireless connection
OK,