Rainbow Electronics MG260 User Manual

Page 189

FLYFOT-MG260-MODULE

Page: 189 / 246

This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.

18.19 FLYFOT Select Voice Gain +WSVG

Description :

The product has 2 voice gain controllers, this specific command selects the microphone gain
controller.

Syntax :

Command syntax : AT+WSVG =

Command

Possible responses

AT+WSVG=

AT+WSVG=0

Note : Select Controller 1 (Default)

Note : Controller 1 selected

AT+WSVG=1

Note : Select Controller 2 (Default)

Note : Controller 2 selected

AT+WSVG=?

+WSVG: (0-1)

Note : Get the list of possible values

Note : possible values 0 or 1

AT+WSVG?

+WSVG: 1

Note : Get the current value

Note : Controller 1 is selected

Defined values

Controller
0 : Controller 1 (Default)
1 : Controller 2

18.20 FLYFOT Status Request +WSTR

Description :

This specific command returns some operation status. It can be used for example to check the state of
the initialisation sequence; the different values returned are Not started, Ongoing, Finished.

Syntax :

Command syntax: AT+WSTR=
Response syntax: +WSTR: ,

Command

Possible responses

AT+WSTR=

+WSTR :,

AT+WSTR=1

+WSTR: 1,2

Note : Select the status 1 (INIT SEQUENCE)

Note : Init finished

AT+WSTR=2

+WSTR: 2,1

Note : Select the status 2 (NETWORK

STATUS)

Note : The network is available