Rainbow Electronics MG260 - Manual (Page 118)

FLYFOT-MG260-MODULE
Page: 118 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
0: Session ended by user.
1: Response given by the user.
2: Help information required by user.
Contains the key pressed by the user.
Values when CmdType=3 (Get Input)
0: Session ended by user.
1: Response given by the user.
2: Help information required by user.
Contains the string of characters entered by the user.
Note:
For Inputs in UCS2 format, the data are entered in ASCII format. Example : For
“8000410042FFFF”entered, the SIM receives 0x000x41 0x00 0x42 with UCS2 DCS. (See the Appendix E
about the differentUCS2 syntaxes).
Values when CmdType=4 (Setup call)
0: User refuses the call.
1: User accepts call.
Values when CmdType=6 (Select Item)
0: Session terminated by the user
1: Item selected by the user
2: Help information required by the user
3: Return to the back item
Contains the item identifier selected by the user
Values when CmdType=11 (Setup Event List)
1: Idle screen available.
2: User activity event.
Sending a Terminal Response to the SIM :
Values when CmdType=95 (Backward Move)
Values when CmdType=96 (Command beyond ME capabilities)
Values when CmdType=97 (ME currently unable to process command)
Values when CmdType=98 (No response from the user)
Values when CmdType=99 (SIM Toolkit Session aborting by the user)