Rainbow Electronics MG260 - Manual (Page 167)

FLYFOT-MG260-MODULE
Page: 167 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
1 set timer of sending data
time of sending data timer. unit of second
Reference Note
17.12 AT+CIPSPRT
AT+CIPSEND Set prompt of ‘>’ when sending data
Test command
AT+
CIPSPRT
=?
Response
+CIPSPRT: (0-NOT PROMPT,1-PROMPT)
OK
Parameter
See set command
AT+CIPSPRT?
Response
OK
Parameter
See set command
AT+ CIPSPRT =
Response
OK,
ERROR
Parameter
< send_prompt >
0 no prompt after issuing AT+CIPSEND command
1 with “>” prompt after issuing AT+CIPSEND command
Reference Note
17.13 AT+CIPCSGP
AT+CIPCSGP Set CSD or GPRS for wireless connection mode
Test command
AT+
CIPCSGP
=?
Response
+CIPCSGP: 0-CSD,DIAL NUMBER,USER
NAME,PASSWORD,RATE(0,3)
+CIPCSGP: 1-GPRS,APN,USER NAME,PASSWORD
OK
Parameter
See set command
Query command
AT+CIPCSGP?
Response
OK