Rainbow Electronics MG260 - Manual (Page 165)

FLYFOT-MG260-MODULE
Page: 165 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Parameter
none
Reference Note
17.8 AT+CIFSR
AT+CIFSR Get local IP address
Test command
AT+
CIFSR
Response
This command is used to get local IP address assigned by GPRS or GSM
network
If wireless connection has been established successfully:
Otherwise
OK
Parameter
none
Reference Note
17.9 AT+CIPSTATUS
AT+CIPSTATUS Query Status
Action command
AT+
CIPSTATUS
Response
This command is used to query current status of connection progress.
State
0 IP INITIAL Initializing state
1 IP START starting state
2 IP CONFIG
3 IP IND activating PDP context/establishing CSD connection
4 IP GPRSACT PDP context activated/CSD connection established
5 IP STATUS local IP address got
6 TCP/UDP CONNECTING connecting
7 IP CLOSE connection closed
8 CONNECT OK TCP/UDP connection established
Reference Note